Max 2
Printing on the Max 2
Build Trays
Build Trays are constructed from a rigid plastic outer frame & a film membrane.
The Build Tray holds liquid resin during the 3D printing process.
This film membrane is subject to wear & tear and over time will show signs of fatigue.
This wear can impact print quality & possible risk of damage to the printer. It is important to monitor the condition of the Build Tray.
MAX 2 Build Trays come in the following configurations:
- 1L
- 2L
- 5L
- 10L
The capacity means the tray will print that amount of liquid resin before it stops working.
![](https://support.asiga.com/wp-content/uploads/2022/08/A19I5078_Asiga-MAX-Build-Tray.jpg)
Checking Build Tray life
From the Settings menu select Hardware > Material Tray > Material Tray data
The Build Tray usage is displayed in %.
![settings settings](https://support.asiga.com/wp-content/uploads/2024/02/settings.jpg)
![Material Tray Material Tray](https://support.asiga.com/wp-content/uploads/2024/02/Material-Tray.jpg)
![Material tray data Material tray data](https://support.asiga.com/wp-content/uploads/2024/02/Material-tray-data.jpg)