PRO 4K XL

Printing on the PRO 4K XL

asiga-logo-pro-4k-xl

Environmental controls​

Back to Support - PRO 4K XL
Back to Support Home
Top

Heater controls

Asiga 3D printers automatically heat resin to a set temperature while printing.

The printer will not wait until the temperature has been reached unless a manual temperature has been set.

To manually set the temperature, follow the instructions below.

Select Settings from Main Menu.

MM-Settings

Select Temperature from Settings Menu.

Settings Menu - Temperature

Select desired setpoint from Temperature Menu.

Slide Controller on.

Heaters will now heat the build chamber.

Settings - Temperature - Setpoint

Print end

During the printing process the resin remains heated to maintain optimal temperature.

Once the print is completed, the heater will switch off and the printer will cool down.

Note: There is no danger in touching the print or the printer immediately after a print is finished. It will be around 30 °C (86°F).