asiga-logo-max

Installing the MAX

Printer components

The diagram below illustrates the main components of your MAX.

  1. Hood
  2. Build platform knob
  3. Build Platform
  4. Build tray clamps
  5. Basin
  6. Touch screen
max-test

Connecting to power

The MAX is supplied with an external power supply and a power lead with a plug type suited to your region.
The external power supply automatically regulates to adapt to the local voltage in your region.

The power supply is safe to use from 100V to 240V.

  • Place the printer on a sturdy surface.
  • Connect the power cable to the printer and a power outlet.
MAX-Power-Cable
  • Flip the Power Switch at the rear of the printer & turn the printer on with the power button on top.
  • The power button should turn green when turned on.

If no lights are visible, check that mains power socket is ON.  If lights are still not illuminated contact your reseller.

MAX-Power- Switch

Language selection

When the MAX has been plugged in and powered on, there are a few steps that need to be performed before printing.

First you must select your desired language.

Language Selection

Printer registration

Please create an Asiga account to access the Material library, software downloads & technical support.
Learn more >

Navigate to www.asiga.com/register and insert the printer serial number displayed on screen.

Product Registration_1000JPG

Fill out the following fields & click Activate.

  • Serial Number
  • Printer Location
 
Registration_Asiga-Admin

 

Enter this activation code on the front panel of your MAX.

Registration_Asiga_Admin_activationcode
  • Once the code has been succesfully entered, tap on register.
  • Your printer should now be fully operational.
Product Registrationn

Connecting to your MAX

There are three ways to connect to your MAX 3D printer:

  1. Wired/ethernet connection
  2. Wifi
  3. Wireless direct

    See below a summary of each of these networking methods.

Wired/Ethernet connection

From the Main Menu select Settings.

Main Menu

Select wired network.

Settings Menu
  • If your network cable is connected properly, you should see an IP Address here.
  • If there is nothing visible,  check the network cable on the rear of the printer or router.
Settings - Wired Menu

Assign fixed IP address

If you wish to assign a fixed IP address to your printer, follow the steps below.

  • Select Settings > Wired Network
settings-wired-selected
  • Toggle off ‘Automatic Configuration’
  • Enter the IP Address & select save.
  • Enter the Subnet Mask & select save.
  • Setting the Gateway, Primary DNS and Secondary DNS are optional & may be left blank.
Settings - Wired Menu

WiFi connection

From the Main Menu select Settings.

Main Menu

To set up a WiFi Connection,  select wireless network.

Settings-Wireless

Select Network Name and find your network from the dropdown list.

Note: Wireless Direct must be turned off!

Settings - Wireless Menu

Wireless direct

Wireless Direct allows the printer to act as a wireless access point. This can be used if there is no router available.

From the Main Menu select Settings.

Main Menu

Select Wireless Direct

Note: This will prevent any WiFi connections to be performed.

Settings-WirelessDirect

Default settings for Wireless Direct:

  • Wireless Network: Printer name
  • IP address: 172.27.10.1
  • Subnet Mask: 255.255.255.0
Settings - Wireless Direct Menu-enabled

Build platform calibration

Build Platform Calibration must be performed regularly to ensure optimal performance from your printer.
Asiga recommends calibrating once a month.

Play Video

Build platform validation

To finalise the build platform calibration, follow the below video.

Play Video

Inserting build tray & resin

The final step in getting your printer print ready!

Eye or skin contact with uncured resin may cause irritation.

Always wear nitrile gloves.

Play Video