asiga-logo-max-x

Network connection troubleshooting

Wired connection

If you are experiencing network connection issues, follow the troubleshooting steps below.

Select ‘Settings’ from Main Menu.

MM-Settings

Select ‘Wired Network’.

settings-wired-selected

Make sure ‘Automatic Configuration’ is turned on.

 

If there is an IP Address showing, your printer is connected to the network.

Settings - Wired Menu

If this did not work, check the following things:

  • Check the network cable for any damage or loose connections. Use a different cable if any damage is visible.
  • Check the router if any lights are on. Restart the router & printer if no activity is detected.

 

Your printer should now be connected to your network. If this did not work, please launch a support ticket here >

Wireless connection

Select ‘Settings’ from Main Menu.

MM-Settings

Select ‘Wireless Network’

settings-wireless-selected

Make sure that wireless network & automatic configuration are enabled.

If your printer is showing a network name, it is connected to the network. 

Settings - Wireless Menu

If your printer is not showing a network name:

  • Select ‘Network Name’
  • Search for your network
  • Input correct password
Settings - Wireless Menu

If there are no networks being shown, make sure that ‘Wireless Direct’ is turned off.

Settings - Wireless Direct Menu-enabled

Printer not detected in Composer

The printer is connected to the network but not showing up in Composer.
Composer needs to be connected to the same network as your printer.

When you favourite (star) a printer, Composer remembers the IP Address.
If the IP Address has changed, that connection can be lost.

  • Unfavourite the printer by clicking on the yellow star.
  • Refresh the Build Properties window.
  • Printer should be visible now.
Build-properties

If you are still experiencing technical difficulties

please launch a support ticket via the button below.