Max 2
Printing on the Max 2
Heater controls
Asiga 3D printers automatically heat resin to a set temperature while printing.
The printer will not wait until the temperature has been reached unless a manual temperature has been set.
To manually set the temperature, follow the instructions below.
Select Hardware from Main Menu.
Select Heating from the Hardware Menu.
Air Heaters
The Air Heaters are designed to raise the Chamber temperature to approximately 10°C above ambient.
Change the Setpoint to the desired temperature.
Activate the Air Heater.
Please note this will affect the Chamber temperature while idle and during printing.
Print end
During the printing process the resin remains heated to maintain optimal temperature.
Once the print is completed, the heater will switch off and the printer will cool down.
Note: There is no danger in touching the print or the printer immediately after a print is finished. It will be around 30 °C (86°F).
